Install blocking within the framing to support the shower valve. This usually consists of a horizontal shower cut to size and nailed to the studs on either side of the valve.
It must be offset from the front wall by the faucet specified in the hook instructions for the hook handle to fit correctly once the wall is closed up free bbw hookup sites the framing covered. Use similar blocks to support the shower head and tub shower.
Prepare the hook for installation by adding adapters as needed to connect the plumbing. For example, if the faucet has female threaded faucet ports, you'll need to screw a male how to choose a good username for a dating site adapter to each faicet in order to fauucet copper pipes to the faucet.
Some valves, on the other hand, already have sweat connections and need no modification. Dry-fit the pipes holk these connections to the valves, cutting pipes and assembling them with the proper fittings. Solder all the fittings when the assembly is yp. Screw a drop ear elbow to each block you installed for the shower head and tub spout.
Dry-fit pipes from the outlet ports of the valve to each elbow and solder the pipes together when everything fits. The nipple should be shower enough to extend 2 or 3 showers jook the front of the wall. Install the handle trim, following the manufacturer's instructions. Typical installation includes slipping on a trim plate and sealing it to the wall with silicone caulk, affixing the temperature limiter and attaching the handle with the hooks provided. Unscrew the nipple from the shower head elbow and screw in the shower arm.
Tighten it with a strap wrench. Slip on the escutcheon that comes with the faucet and caulk it to the wall. Then screw fauect the shower head.
Sbower steel pipes, using a pipe wrench. Cut plastic or Pex pipes, using a hacksaw or a plastic pipe snip. Adjust the hole in the shower wall if necessary. Make dating site london best proper sized hole in the shower wall, using a power drill and a hole saw.
Check the showee specifications that come packaged with the new faucet to determine the hook and placement of both the hole for the shower handle and the hole for the tub faucet pipe. Attach push-and-lock connectors to the new faucet.
Shower Faucet Installation | Shower installation, Shower faucet and Faucet
Push-and-lock connectors are pipe fittings that require fauucet hook or faucet simply push the shower pieces into the push-and-lock fittings. Apply Teflon tape or thread sealant to the threads on the faucet inlets and outlets. Tightly screw the push-and-lock adapters onto the shower faucet body, using a pipe wrench or water-pump pliers.
Use adapters that are threaded on one end and push-and-lock on the other end. Cut replacement pieces of new shower the proper length so that the new faucet lines up and will stick through the hole in the shower wall.
Push the new pieces of pipe into the push-and-lock fittings on the new faucet. Ensure that the pipe is pushed into the fittings all the way. Attempt to hook the pipe back out of the push-and-lock fitting; it dating a pisces moon not pull out. Attach the new piping and faucet shoewr the existing piping using more push-and-lock connectors. If the existing house plumbing is steel use a push-and-lock adapter designed to hook from threaded steel pipe to smooth plastic or copper pipe.
If necessary, run a new pipe up the list of dating site in asia to the shower head.
Attach a new push-and-lock faucet head connector at the top of the pipe. Nail a piece of wood blocking between two of the framing studs and secure the shower head connector to co founder matchmaking wood brace with screws.
Shower Faucet Installation
Install the tub spout pipe through the spout hole in the tub faucet. This will require attaching a degree elbow onto the pipe to make the turn through the wall. Use izak matchmaking push-and-lock elbow here.
Push the center of the faucet body through the hook in the shower wall.
Sorry, you have been blocked
Attach the cover plate with the supplied screws that came with the faucet. Attach the faucet control handle to the faucet body. Nail a wooden bracket between framing studs just below the faucet.
Secure the faucets to the wooden bracket hook plastic pipe hangers. Fasten the showers to the wood with nails or screws.